Downloads: 123 | Views: 287
Research Paper | Civil Engineering | Iraq | Volume 6 Issue 12, December 2017 | Rating: 6.8 / 10
Investigating the Effect of Using Waste Glass on the Properties of Asphalt Concrete Wearing Course Mixture
Roaa Hamed Latief
Abstract: The reuse or recycling of waste materials in different aspects of life is served the objective of sustainability and be beneficial to society. In recent years, a wide variety of waste materials were used in pavement construction. One of these materials is glass that generally produces in large quantities and crushed glass can be considered feasible alternative source of aggregate for asphalt mixture production. This study focused on examining the asphalt mixture properties of wearing course using crushed glass as fine aggregates. Fine crushed glass with various percentages by total weight retained on sieve 2.36 mm, 0.3 mm and 0.075 mm was used in the study. The results indicate that mixes containing crushed glass had lower Marshall stabilities and tensile strengths compared to conventional mixes. Moreover, the moisture damage resistance of glass-asphalt mixture was acceptable and satisfy the specification requirements for percentages of glass replacement up to 30 percent. Consequently, adding 30 percent of glass by weight of three sizes is the optimal value which represents about 15.6 percent by weight of total aggregate with maximum size 2.36 mm. The study has concluded that recycling and reuse of waste glass in asphalt mixture could be possible and yield a result which satisfies the specification of asphalt concrete wearing course mixtures.
Keywords: waste glass, Marshall properties, stripping, tensile strength
Edition: Volume 6 Issue 12, December 2017,
Pages: 1592 - 1598