Downloads: 103
Research Paper | Material Science and Engineering | Nigeria | Volume 4 Issue 10, October 2015
Water Absorption Capacity of Date Palm (Phoenix dactylifera) Pits Reinforced Epoxy Composites
Kolawole S. A. | Abdullahi D. | Dauda B. M. | Ishiaku U.S [2]
Abstract: The hydration behaviour of composites upon exposure to environmental conditions is an important issue. This could offer important information on the mechanical properties of such composite when used for outdoor applications. Immersion of composite in water for period of time is an effective way to investigate the moisture absorption behaviour of such composites. Date pits particles (150m) of filler loading 10, 20, 30, 40 & 50 wt % composites were prepared. Composites sheets were prepared via hand lay-up technique in a fabricated glass mould. The hydration capacity was determined by measuring water uptake of specimen at regular interval of 24hrs. Absorption tests were performed at room temperature of 25oC for 768hrs. The results showed that water absorption increases with the increase in wt % of the filler loading. In this paper, the absorption behaviour of date pits filler reinforced epoxy composites showed that the addition of 10 % filler weight into the matrix increased the water absorption of the composite by 0.33 % after 24hrs of immersion while increasing the filler content by 50 % weight increased the percentage absorption to 1.12. The highest value of 9.312 % was recorded for composite of 50 % filler ratio after 768hrs. The water absorption of date pits reinforced epoxy composites was found to follow a Fickian behaviour where it did reach equilibrium.
Keywords: Date pits, Composite, Fickian behaviour, Water absorption, Diffusivity, EpoxyThermosets, Hardness, Flexural Strength, Tensile, Impact, Modulus
Edition: Volume 4 Issue 10, October 2015,
Pages: 1390 - 1393
Similar Articles with Keyword 'Composite'
Downloads: 0
Research Paper, Material Science and Engineering, India, Volume 10 Issue 9, September 2021
Pages: 889 - 893Tribological Behaviour of Aluminium based Silicon Carbide with Additional Fillers of LM25 Alloy
Wadaje Smarnika Balasaheb | S. Y. Pawar
Downloads: 3 | Weekly Hits: ⮙2 | Monthly Hits: ⮙2
Doctoral Thesis, Material Science and Engineering, India, Volume 11 Issue 5, May 2022
Pages: 53 - 60Performance Probability Prediction of a Sandwich Panel with Honeycomb Core Structure
Nagalingeshwara V | S K Maharana