Downloads: 114 | Views: 267
Research Paper | Mechanical Engineering | India | Volume 3 Issue 7, July 2014 | Popularity: 6.4 / 10
Finite Element Analysis of Springback of a Sheet Metal in Wipe Bending Process
Amul Biradar, M. D. Deshpande
Abstract: This work presents a study of spring back in wipe bending metal forming process. Spring back is one of the most sensitive features of the sheet metal forming, which occurs due to elastic recovery during unloading. The main purpose of this work is spring back prediction of sheet metal copper alloy and investigation into the causes of the spring back, such as process parameter, geometry of tools etc. In this work the prediction model of spring back in wipe bending process was developed using finite element method code ANSYS APDL 14.0 and an over bend approach is applied to compensate the spring back and the obtained spring back for different process parameters are validated by analytical method.
Keywords: Springback, Plasticity, Wipe bending, over bend approach
Edition: Volume 3 Issue 7, July 2014
Pages: 852 - 858
Make Sure to Disable the Pop-Up Blocker of Web Browser
Similar Articles
Downloads: 145
Research Paper, Mechanical Engineering, India, Volume 8 Issue 3, March 2019
Pages: 1316 - 1319Study of Advanced Magnesium Alloys with Improved Bendability for Roll Forming
Vijay Sisarwal
Downloads: 207
Research Paper, Mechanical Engineering, Iraq, Volume 8 Issue 1, January 2019
Pages: 267 - 271A Study of New Parameters Effect on the Springback of Aluminum Sheets in Plane Strain Bending
Fathi Al-shamma, Hajer M. Issmael