Downloads: 111 | Views: 233
Review Papers | Manufacturing Engineering | India | Volume 6 Issue 5, May 2017 | Popularity: 6.3 / 10
Review on Optimization Process Parameters of HCHCR, OHNS, EN24 Materials
Dnyaneshwar. B. Unawane, K. J. Godihal
Abstract: Cubic boron nitride ( CBN) is the second hardest material in the material. Diamond is the only hardest material & its natural material. CBN is actually a powder which is coated on the caeamics/ carbide inserts, in that the binder materials are titanium, so the there is huge area to work on the tool life of CBN inserts, because it is costlier than tungsten carbide & other insert materials. The hard-turning process is steadily finding its place in modern manufacturing technology and with advance cutting tool materials it can be applied as another machining process to turning providing a more economical way to finish hard surfaces. The main concerns of hard turning are tooling cost and the effect of process on machining characteristics. The poor selection of this parameters may cause excessive tool wear and increased surface roughness. Hence there is a need to find the right parameters to achieve the right dimensional accuracy, good surface and maximum material removal rate. This paper reviews the effects of various process parameters such as cutting speed, depth of cut and feed rate on the response parameters such as surface roughness, material removal rate and chip reduction coefficient. Through this study main cutting parameters which affect the turning operation are discussed.
Keywords: CBN, HCHCR CUTTING SPEED, FEED, DEPTH OF CUT
Edition: Volume 6 Issue 5, May 2017
Pages: 2014 - 2017
Make Sure to Disable the Pop-Up Blocker of Web Browser
Similar Articles
Downloads: 0
Experimental Result Paper, Manufacturing Engineering, Vietnam, Volume 11 Issue 6, June 2022
Pages: 1224 - 1227Multi-Objective Optimization of Turning Parameters to Minimize Surface Roughness and Material Removal Rate Using TOPSIS Combining Entropy Weight
Nguyen Anh Thang, Truong Van Luong, Tran Van Hieu
Downloads: 3 | Weekly Hits: ⮙1 | Monthly Hits: ⮙3
Research Paper, Manufacturing Engineering, India, Volume 12 Issue 12, December 2023
Pages: 1000 - 1007Experimental Investigations on Mechanical Properties of Friction Stir Processed AISI 4140 Steel
Ashish Patial, Dr. S. S. Dhami
Downloads: 3 | Weekly Hits: ⮙1 | Monthly Hits: ⮙1
Experimental Result Paper, Manufacturing Engineering, Turkiye, Volume 13 Issue 6, June 2024
Pages: 1748 - 1750Investigation of the Effects of Cutting Parameters on Surface Roughness in Turning Operations
Bugra ARSLAN, Ali Serhat ERSOYOGLU
Downloads: 100
Research Paper, Manufacturing Engineering, China, Volume 5 Issue 1, January 2016
Pages: 1505 - 1508Simulation and Optimization of Aviation Integral Impeller Machining Based on VERICUT
Hui Lu, Yujun Cai, Guohe Li
Downloads: 108
Comparative Studies, Manufacturing Engineering, India, Volume 4 Issue 3, March 2015
Pages: 1291 - 1294Experimental Investigation on Surface Roughness in Finish Turning of EN 8 Steel
K. G. Nikam, S. V. Vanjari