Downloads: 117 | Views: 291
Research Paper | Material Science and Engineering | India | Volume 5 Issue 2, February 2016 | Popularity: 6.2 / 10
Preparation & Characterization of Insulating Rice Husk Ash Refractory using Rice Husk as Pore Forming Agent
SK Saddam Hossain, Aman Bhardwaj, Manas Ranjan Majhi
Abstract: Preparation of the Insulating Silica Refractory was done by utilizing the waste Rice Husk Ash taken from rice mills. These insulating properties can be obtained by controlling the porosity of the sample by using different amount of rice husk as pore forming media and different firing temperatures. Experimental compositions were prepared by RHA whose chemical composition were determined by X-RF. Rectangular samples were prepared using hydraulic press. Physical properties like Apparent Porosity was found to be favorable for Thermal Insulation and was observed to be increasing with increasing the amount of pore forming agent (Rice Husk). Mechanical strength were found to be good considering the porosity present. In addition the Crystalline phase were also been studied by XRD analysis.
Keywords: Pore forming agent, Waste Rice Husk, Rice Husk Ash, Insulation, Silica
Edition: Volume 5 Issue 2, February 2016
Pages: 457 - 461
Make Sure to Disable the Pop-Up Blocker of Web Browser
Similar Articles
Downloads: 86
Research Paper, Material Science and Engineering, India, Volume 5 Issue 8, August 2016
Pages: 1619 - 1622Characterization of Chemically Synthesized Nanofilms
Bhaskarjyoti Bodo, Ranjit Singha, G. Patwari
Downloads: 92
Research Paper, Material Science and Engineering, India, Volume 4 Issue 11, November 2015
Pages: 1183 - 1187Development of Alumino-Silicate Investment Shell Moulds to Cast 6061 Al-Alloy
A. Chennakesava Reddy
Downloads: 105
Research Paper, Material Science and Engineering, India, Volume 4 Issue 12, December 2015
Pages: 2063 - 2068Growth, Characterization and Morphology Study of Gel-Grown Lead-Cadmium-Mixed Levo-Tartrate Crystals
Harshkant Jethva, Mihir Joshi
Downloads: 109 | Weekly Hits: ⮙1 | Monthly Hits: ⮙1
Research Paper, Material Science and Engineering, India, Volume 3 Issue 7, July 2014
Pages: 859 - 861Microstructure and Wear Characterization of A356-ZrSio4 Particulate Metal Matrix Composite
Shivanna, V. S. Ramamurthy
Downloads: 110
Research Paper, Material Science and Engineering, Nigeria, Volume 5 Issue 6, June 2016
Pages: 924 - 928Characterization of Kono-Boue Clay as Possible Catalyst for Biodiesel Production
Gbarakoro S. L., Konne J.L, Boisa N.