Downloads: 8 | Views: 289 | Weekly Hits: ⮙1 | Monthly Hits: ⮙1
Experimental Result Paper | Electronics Engineering | Mexico | Volume 13 Issue 4, April 2024 | Popularity: 5.7 / 10
Optimization of the Process of Obtaining P-Type Semiconductors (CuO) in the Laboratory using Lean Six Sigma
Ortega Nava Eduardo, Mastache Mastache Jorge Edmundo, Lopez Ramrez Roberto, Soriano Vargas Orlando
Abstract: The following work shows comparisons of the results of experiments related to the obtaining of metal oxides, specifically copper nanoparticles (Cu), making a comparison between two obtaining techniques, one by Cu sheet with a purity of 99.99% and the optimization of the obtaining process using the Lean Six Sigma methodology to obtain a Cu film deposited by the sputtering method. This technique that was used to obtain this material presents notable adhesion to the substrate, compositional control and purity. Furthermore, it is an environmentally friendly and, above all, reproducible technique, allowing a wide range of metals to be synthesized and characterized with this sputtering technique. Likewise, samples of Copper (Cu) metal deposits were thermally treated with the intention of obtaining copper oxide. copper (CuO) and be used as a proposed p-type semiconductor material based on metal oxides, which was formed through the thermal oxidation technique in a high temperature tubular furnace at 900?C, with air flow at 600sccm to form an oxidizing environment and consequently form continuous layers of Copper Oxide (CuO) material and are structurally analyzed with X-ray diffraction.
Keywords: Spraying, Oxides, Metals, Copper, Semiconductor
Edition: Volume 13 Issue 4, April 2024
Pages: 448 - 451
DOI: https://www.doi.org/10.21275/SR24404045114
Please Disable the Pop-Up Blocker of Web Browser
Verification Code will appear in 2 Seconds ... Wait