Downloads: 135 | Views: 266
M.Tech / M.E / PhD Thesis | Mechanical Engineering | India | Volume 4 Issue 10, October 2015 | Popularity: 6.8 / 10
Performance Analysis of a Finned Pipe Earth Air Heat Exchanger
Nitish Shrestha, Dr. A. Aruna Kumari
Abstract: Earth air heat exchanger is a useful system to decrease or increase the air temperature with respect to the climatic and soil condition. The general aim of this work is to contribute towards performance analysis of earth air heat exchanger at various atmospheric conditions. The finned tube is considered as the effect of finned tube in heat transfer for cooling mode increases the thermal performance. The experimental result is compared simulation of experimental work. The atmospheric condition is obtained from the experimental condition is simulated in ANSYS Fluent R14.5. This atmospheric condition is for cooling mode of the inlet air. The atmospheric condition for this test is in month of June. This research on earth air heat exchanger consists of experimental and simulation solution. The average coefficient of performance from the experimental setup is 1.57. Experimental setup is constructed at the premises of JNTUH, Hyderabad having soil diffusivity of 0.84-2.3610^ (-6) m^2/s at depth of 5ft with 17 fins. It is observed that the increase in the length of the pipe reduces the temperature of the inlet air in cooling mode. The temperature decrease for a length of 1.2m varies from 1-3 C at velocity 6.5m/sec.
Keywords: EAHX, CFD, Cooling
Edition: Volume 4 Issue 10, October 2015
Pages: 109 - 113
Make Sure to Disable the Pop-Up Blocker of Web Browser
Downloads: 604 | Views: 731
Mechanical Engineering, India, Volume 3 Issue 10, October 2014
Pages: 1286 - 1290Design and Optimization of Mangalore Clay Roofing Tile
RL. Sarathraj, AK. Somayaji
Downloads: 449 | Views: 766
Mechanical Engineering, India, Volume 9 Issue 8, August 2020
Pages: 1 - 9Fluid Flow Analysis in a Concentric Annulus with a Rotating Inner Cylinder using ANSYS
M. R. Sahin
Downloads: 393 | Views: 555
Mechanical Engineering, India, Volume 3 Issue 10, October 2014
Pages: 361 - 365Automation of Drilling Process Using Electro-Pneumatics System
Akshay R Mahendraker
Downloads: 374 | Views: 626
Mechanical Engineering, India, Volume 6 Issue 2, February 2017
Pages: 1 - 6Reverse Engineering on Two Wheeler Brake Rod: Case Study
M.BN. Fanisam, Patil Mitesh, Pagare Nitin
Downloads: 350 | Views: 594
Mechanical Engineering, India, Volume 8 Issue 1, January 2019
Pages: 71 - 73Analysis of an Electromagnetic Clutch
Shivendra Kumar Dubey