Downloads: 134 | Views: 289
Research Paper | Mechanical Engineering | India | Volume 2 Issue 8, August 2013 | Popularity: 6.7 / 10
Performance Analysis of CI Engine using Pongamia Pinnata (Karanja) Biodiesel as an Alternative Fuel
P. L. Naik, D. C. Katpatal
Abstract: Biodiesel is an alternative fuel of diesel, is described as fatty acid methyl ester from vegetable oils or animal fats. The main objectives of the present work is to reduce higher viscosity of Pongamia pinnata (Karanja) oil using esterification followed by transesterification and to assess the performance and emission characteristics of diesel engine. The important properties of engine fuel such as density, viscosity, flash point and calorific value of Karanja methyl ester were compared with diesel fuel. Various proportions of Karanja oil methyl ester blends (10 %, 20 %, and 30 %) were used for conducting the performance test at varying load conditions. Engine parameters such as brake specific fuel consumption, brake thermal efficiency were calculated and emission parameter such as emission of carbon dioxide, hydrocarbons and oxide of nitrogen gases in exhaust were recorded. By using Karanja oil methyl ester blends with diesel fuel, the result showed that the brake thermal efficiency of biodiesel blends with diesel fuel wee less as compared to diesel fuel. Fuel consumption was increased with increase in blend proportions. It is found that the emission level of CO and HC level decreased with increased in blend proportion in diesel fuel. NOx emission increased with increase in blend proportion in diesel fuel. The test results indicate that biodiesel B-20 and lesser can be used as an alternative without any modifications of diesel engine.
Keywords: Karanja oil methyl ester, Karanja, performance, exhaust emissions
Edition: Volume 2 Issue 8, August 2013
Pages: 445 - 450
Make Sure to Disable the Pop-Up Blocker of Web Browser
Similar Articles
Downloads: 265 | Weekly Hits: ⮙1 | Monthly Hits: ⮙1
M.Tech / M.E / PhD Thesis, Mechanical Engineering, India, Volume 3 Issue 6, June 2014
Pages: 478 - 481Design and Development of Solar Powered Air Cooler
Vijaykumar Kalwa, Dr. R. Prakash
Downloads: 184 | Weekly Hits: ⮙1 | Monthly Hits: ⮙1
Survey Paper, Mechanical Engineering, India, Volume 8 Issue 6, June 2019
Pages: 2320 - 2324A Review Paper on Electro Chemical Discharge Machining Technique
Rajeev Sharma
Downloads: 235 | Weekly Hits: ⮙2 | Monthly Hits: ⮙2
M.Tech / M.E / PhD Thesis, Mechanical Engineering, India, Volume 7 Issue 5, May 2018
Pages: 44 - 47Review Paper on Experimental Investigation on Vortex Tube Refrigeration System
Abhinav Giri
Downloads: 0
Analysis Study Research Paper, Mechanical Engineering, India, Volume 11 Issue 4, April 2022
Pages: 610 - 617Studies on Exhaust Emissions of a Low Heat Rejection Engine using Fish Oil - Diesel Blends
Chandrasekhar Chebiyyam, Dr T Ch Siva Reddy, Dr B. Sudheer Prem Kumar, Dr C M Varaprasad
Downloads: 1
Research Paper, Mechanical Engineering, India, Volume 10 Issue 6, June 2021
Pages: 1423 - 1428Improvement in Performance of Heat Exchanger by using Promoters
Saurabh D Vighe, VG Gore