Downloads: 129 | Views: 243

Research Paper | Mechanical Engineering | India | Volume 7 Issue 1, January 2018 | Popularity: 6.2 / 10

Rate This Article!      

Design and Analysis of Nozzle Junction

Saurabh Modi, Anand Modi, Rakesh Prajapati

Abstract: In various tanks, pressure vessels as well as heat exchanger, nozzle is very important & serves as inlet & outlet for process fluid & cooling fluid. Number of nozzle could be one or more depending upon requirement but it tends to lower strength of parent component, which may lead to failure of vessel. In this paper, nozzle is used for inlet & outlet of propane gas as well as cooling water. In order to improve strength at nozzle shell junction, reinforcement pad is used sometimes to prevent failure. So, here nozzle to shell junction is analyzed by considering various areas which affect strength of junction (either improve or degrade strength) & it is predicted that pad is required or not & if pad is required then its dimensions like thickness & diameter is calculated based on ASME Codes. In addition, finite element analysis of junction is done to check stress induced at the junction.

Keywords: Hexahedron & Tetrahedron meshing, Finite Element Analysis, Nozzle Junction, Heat Exchanger

Edition: Volume 7 Issue 1, January 2018

Pages: 1108 - 1111

Make Sure to Disable the Pop-Up Blocker of Web Browser

Click to Cite this Article

Similar Articles