Downloads: 128 | Views: 431 | Weekly Hits: ⮙1 | Monthly Hits: ⮙1
Comparative Studies | Mechanical Engineering | India | Volume 4 Issue 3, March 2015 | Popularity: 6.4 / 10
Stress Analysis of Crane Hook with Different Cross Section Using Finite Element Method
Sayyedkasim Ali, Harish Kumar, Shishir Agrawal, Milin Kumar Rajurkar
Abstract: Crane hook is a mechanical component used for material handing or transfer, observes stresses, induced when different kinds of load applied. From the safety point of view the crane hook damaged must be prevented due to crack fracture developed caused mainly at stress concentration areas. Stress on crane hook depends upon various geometric variables as well as material properties. In this analysis the material properties of hook kept constant throughout the analysis and stress is to be reduced by varying different geometric parameters. After optimizing the cross section of crane hook the approach turned towards the material saving during manufacturing of crane hook. For material saving the maximum stress region is to be identified by using FEM analysis and then material is removed by considering the maximum bending stress at failure point.
Keywords: Crane Hook, ANSYS, Curved Beam, Stress, Winkler-Bach Theory
Edition: Volume 4 Issue 3, March 2015
Pages: 1954 - 1956
Make Sure to Disable the Pop-Up Blocker of Web Browser
Similar Articles
Downloads: 1 | Weekly Hits: ⮙1 | Monthly Hits: ⮙1
Research Paper, Mechanical Engineering, China, Volume 13 Issue 4, April 2024
Pages: 1173 - 1180An Elastoplastic Model Simulation to Investigate the Bending Load on Lattice Structures
Reza Shamim
Downloads: 2
M.Tech / M.E / PhD Thesis, Mechanical Engineering, India, Volume 4 Issue 3, March 2015
Pages: 1426 - 1430Modeling and Analysis of Human Liver by Using Finite Element Analysis
N. Kishore Kumar, K. Ashok Kumar Raju
Downloads: 2 | Weekly Hits: ⮙2 | Monthly Hits: ⮙2
Masters Thesis, Mechanical Engineering, India, Volume 12 Issue 9, September 2023
Pages: 533 - 541Analysis and Design Optimization of Hallow Section Valve Springs
Jagadish R. Bagali, R. S. Matti, B. S. Vivekanand
Downloads: 2 | Weekly Hits: ⮙2 | Monthly Hits: ⮙2
Research Paper, Mechanical Engineering, India, Volume 12 Issue 10, October 2023
Pages: 388 - 391Deflection and Stress Analysis of Sandwich Plate under Uniformly Distributed Load using FSDT
Pranav Vishwakarma, Dr. Rajesh Kumar Satankar
Downloads: 2 | Weekly Hits: ⮙2 | Monthly Hits: ⮙2
Informative Article, Mechanical Engineering, India, Volume 12 Issue 11, November 2023
Pages: 315 - 320CFD Analysis of Tapered Wing with NACA 64-210 at the Tip and NACA 64-215 at the Root
Nataraj Kuntoji, Dr. Vinay V Kuppast